Skip to main content
  • SLIO

SLIO: Signal modules analog

Signal modules (SM) to connect sensors and actuators are the interfaces of the system to the process. Analog signal modules acquire the analog control signals (e.g. measurement data) to and out of the process level. Depending on the application and type the control signals are acquired from the process level and converted into interpretable signals for controlling. Analog output modules convert the internal control signals into signals suitable for the process level.

A variety of different analog signal modules accurately provide the inputs and outputs that are required for each task. The analog modules differ in the number of channels, voltage and current ranges, isolation, and diagnostic and alarm capability.

Each signal module consists of a terminal and an electronics module.

The terminal module (TM) contains the retainer for the electronic module (EM), the backplane connectors and contacts for the distribution of the load power supply electronics, the modular connection to DC 24 V load power supply and the staircase-shaped terminal block for the wiring.

Furthermore the terminal module processes a locking system for fixing to a profile rail. The SLIO system can also be constructed "block by block" outside the cabinet and later assembled as a complete system in the control cabinet.

The functionality of the signal module is defined via the electronics module that is connected by a secure sliding mechanism to the terminal module.

During service the defective electronic module can be replaced without detaching the wiring.

Characteristics

2 or 4 channel

12 bit or 16 bit resolution

Functions of the inputs / outputs programmable

Most various assemblies, suitable for measuring transducers (current/voltage, resistance or temperature sensors)

Direct mapping and readability of the channel conditions via status LEDs

Safe and time-saving installation by the terminal assignment mounted on the module

When changing the module equipment identification (BMK) is retained on the TM

Individual single-channel lettering on insertion strip

24 month warranty


Order no.Name/Description

031-1BB10

SM 031 - Analog input

2 inputs 12Bit
Current 0(4)...20mA
2 wire
[Datasheet]
[Manual]
[STP]

031-1BB30

SM 031 - Analog input

2 inputs 12Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

031-1BB40

SM 031 - Analog input

2 inputs 12Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]
[STP]

031-1BB60

SM 031 - Analog input

2 inputs 12Bit
Current 0(4)...20mA
2 wire
[Datasheet]
[Manual]
[STP]

031-1BB70

SM 031 - Analog input

2 inputs 12Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

031-1BB90

SM 031 - Analog input

2 inputs 16Bit
Thermocouple type J, K, N, R, S, T, B, C, E, L
Voltage -80mV...+80mV
[Datasheet]
[Manual]
[STP]

031-1BD30

SM 031 - Analog input

4 inputs 12Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

031-1BD40

SM 031 - Analog input

4 inputs 12Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]
[STP]

031-1BD70

SM 031 - Analog input

4 inputs 12Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

031-1BD80

SM 031 - Analog input

4 inputs 16Bit
0 .. 3000 ohm resistance
Resistance measurement with 2, 3, and 4-wires
resistance temperature sender Pt100, Pt1000, NI100 and NI1000
[Datasheet]
[Manual]
[STP]

031-1BF60

SM 031 - Analog input

8 inputs 12Bit
Current 0(4)...20mA
2 wire
[Datasheet]
[Manual]

031-1BF74

SM 031 - Analog input

8 inputs 12Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]

031-1CA20

SM 031 - Analog input

Direct connection of a resistor full bridge (DMS) or load cell
4- or 6-wire measurement
16 (24)Bit resolution
Auto/self calibration zero point and final value
Absolute exactness radical error ±0,1% (± 0,01%)
Onboard power supply 2V5, 5V, 7V5, 10V and 12V
[Datasheet]
[Manual]

031-1CB30

SM 031 - Analog input

2 inputs 16Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

031-1CB40

SM 031 - Analog input

2 inputs 16Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]
[STP]

031-1CB70

SM 031 - Analog input

2 inputs 16Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

031-1CD30

SM 031 - Analog input

4 inputs 16Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

031-1CD35

SM 031 - Analog input

4 inputs 16Bit
Voltage 0...10 V
reduced parameter bytes
[Datasheet]
[Manual]
[STP]

031-1CD40

SM 031 - Analog input

4 inputs 16Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]
[STP]

031-1CD45

SM 031 - Analog input

4 inputs 16Bit
Current 0(4)...20 mA
reduced parameter bytes
[Datasheet]
[Manual]
[STP]

031-1CD70

SM 031 - Analog input

4 inputs 16Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

031-1LB90

SM 031 - Analog input

2 inputs 16Bit
Thermocouple typ J, K, N, R, S, T, B, C, E, L
Voltage -80mV...+80mV
requires less parameter bytes than module 031-1BB90
[Datasheet]
[Manual]
[STP]

031-1LD80

SM 031 - Analog input

4 inputs 16Bit
0 .. 3000 ohm resistance
Resistance measurement with 2, 3, and 4-wires
requires less parameter bytes than module 031-1BD80
resistance temperature sender Pt100, Pt1000, NI100 and NI1000
[Datasheet]
[Manual]
[STP]

031-1PA00

Energy measurement terminal

voltage, current
frequency
230/400 V
1 A
remanent storage of the energy values | diagnostic function
resolution measurement 24 Bit
3-phase and N-connector
electrical efficiency | electrical work
harmonic harmonics
phases delay cos j
[Datasheet]
[Manual]

032-1BB30

SM 032 - Analog output

2 outputs 12Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

032-1BB40

SM 032 - Analog output

2 outputs 12Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]
[STP]

032-1BB70

SM 032 - Analog output

2 outputs 12Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

032-1BD30

SM 032 - Analog output

4 outputs 12Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

032-1BD40

SM 032 - Analog output

4 outputs 12Bit
Current 0(4)...20mA
[Datasheet]
[Manual]
[STP]

032-1BD70

SM 032 - Analog output

4 outputs 12Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

032-1CB30

SM 032 - Analog output

2 outputs 16Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

032-1CB40

SM 032 - Analog output

2 outputs 16Bit
Current 0(4)...20 mA
[Datasheet]
[Manual]

032-1CB70

SM 032 - Analog output

2 outputs 16Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]

032-1CD30

SM 032 - Analog output

4 outputs 16Bit
Voltage 0...10 V
[Datasheet]
[Manual]
[STP]

032-1CD40

SM 032 - Analog output

4 outputs 16Bit
Current 0(4)...20mA
[Datasheet]
[Manual]

032-1CD70

SM 032 - Analog output

4 outputs 16Bit
Voltage -10 V...+10 V
[Datasheet]
[Manual]
[STP]